Additional information
| Weight | 1.843 oz |
|---|---|
| Dimensions | 25.4 × 15.24 × 12.7 in |
Shop
Single Channel Fail Safe Module
$398.99
Single channel continuous mode module
Fail Safe sequence module, Power, Carrier failure or end of transmission control
Comply with FCC part 15.247 sub E on Continuous transmission timing
OPERATION: Transmitter sends an interval pulse as long as the input is activated by a control, switch or sensor etc. The Receiver at the other end turns the output ON decodes the interval to verify the status of the transmitter, If The Transmitter, Finalize the control action, loss of power or carrier, then The receiver decoder will acknowledge and turn the Receiver output OFF until the signal is activated again
9FS1 Receiver Module
Operating voltage 12VDC
Input: Dry Contact
Output: 10A SPDT
Enclosure Weatherproof IP65, 9x9x4 inches
NOTE: Transmitter or receiver not supplied,
Specifications
Specifications Digital Transmitter MXT-4
| Supply power | 12VDC / 8Watt, Standby 1mA, TX 1200mA |
| Inputs | N/O Normally Open, digital dry contact |
| Transmitter power | per FCC Part 15.249, 50mV/m @ 3m |
| Frequency | 154MHz • License free MURS band |
| Transmission | Digital EncodedGaussian_frequency-shift_keying |
| Channels | 16 addresses per system GFSK |
| Input Wiring | Terminals, Dry Contact |
| Response | Loop 500 msec |
| Weight | 5.36lb ( 2.44kg ) each unit |
| Dimensions | NEMA4, IP65-6.73″ W x4.76″ H x 2.17″ D |
